Coffee and Cork

     A Mothers Day gift made with Stix2 Cork Sheet and an empty coffee tin.

     I measured the cork sheet against the tin to get the right height, then cut it making sure to cut a little extra in the length to go around the tin.
     Using the ultra (red) sticky tape I put a line of it from top to bottom and all the way around the top and bottom. I only removed the protective film from the top to bottom line, carefully lining up the cork half way across it so it would stick the beginning and the end.
     Once happy with the vertical placement I began to wrap the cork carefully around the tin removing a little of the tape cover at a time. Once back at the beginning I stuck the end onto the remaining half of the vertical tape. There was a little overlap that I trimmed off by running my finger nail down the cork to break the fibres.
     Using Gingham card I cut one large Sizzix flower and a couple of leaves, a cork daisy type flower and a plain card small flower, with a plain green leaf. Assembling the flower was easy using Stix2 PVA to fix it all together, this could be done with hot glue if any of the surfaces are being troublesome. All that remained was to stick the flower to the tin and add a small silver pearl to the flower centre.
 
     With the exception of the tin and the die all products are available from Stix2 Anything, either direct or at your local craft shop.

Materials List
 S57421 Cork Sheet  (New product)
 A4250LEMON - Gingham Card
 A4250GREEN - Gingham Card
 Tinted Card - Holly Green & Intense Yellow
 S57262 3D PVA Glue
S57091 Ultra Clear Tape 12mm

I would like to enter this gift in the following challenges:

Get Creative - Anything Goes/optional Not A Card

Make My Monday - Anything New

Crazy 4 Challenges - Include A Flower