Tuesday 28 September 2010

Lone Stag


This topper is very quick and easy to create but looks great. All I used was Distress Ink Chipped Sapphire, the stag from the 'Winter Wonderland' stamp plate by Sam Poole, Cosmic Shimmer embossing powder 'Aurora Crystal Sparkle' and a tiny spritz of Cosmic Shimmer mica powder 'Pearlescent' from the 'Metalics' set, Oh and a torn piece of paper.
The card is inked from the top working down. Tear a piece of paper to make your hill mask. Lay this paper mask about 1/4 of the way down the card and using cut and dry foam gently ink up your sky. Move the paper mask down a little changing the angle slightly and begin inking up your hills, this time use less ink and less pressure to achieve the paler layer. Repeat this for the next layer again applying even less ink and even less pressure, now you have a graduated background.
Spritz the card lightly with water and dab off, this will give you a snowfall effect. It doesn't show up very well in this picture but I then spritzed the card with a tiny spray of the pearlescent mica made from the powder set using the little bottle in the pack.
A tip for making up your powders into sprays - don't follow the instructions on the bottle as this will use up most of your powder, ignore the little arrows and only mix up 1/2 a teaspoon of powder with enough water to reach the lower arrow. It lasts ages and you can always make more if you need it.
The stag is stamped in Chipped Sapphire and then embossed with Aurora Crystal Sparkle and that's all there is to it. This card looks good in other colours too, like Dusty Concorde. Depending on how you mat and layer the topper you could get several different looks to your cards using the same picture, great for a few last minute extras.

1 comment:

  1. Hi Rushanne,
    As you say simple yet striking!!
    Thanks for that, will certainly pinch that idea!!!
    Was nice to see you on Sunday at Ally Pally.
    Good luck for your Sat. demo.
    Viv x

    ReplyDelete

This blog does not allow anonymous comments.